Battery Warmers

For the most up-to-date information regarding our products, visit our new website at Phillips and Temro.

Phillips and Temro

Battery Warming

Arctic Fox Battery Warmers utilize hot engine coolant to provide heat beneath your batteries. Warm batteries accept a charge quicker and more completely than cold batteries do. So after a days worth of driving or working your equipment your battery's state of charge will be higher than if it was cold all day long. This means that when you go to start your engine the next, cold morning, you'll have more power available than you would if your battery was cold during the charging cycle.

What are the benefits of battery heating in cold weather? Less deep cycling, longer battery life, more confidence that your equipment will start during adverse weather conditions, and less load on your charging system, also possibly extending the the life of your alternator, starter motor & solenoid.

Today's Over-The-Road trucks also have many power hungry options. Keeping the vehicle batteries fully charged will possibly lengthen the time these devices can be operated before having to start the engine to recharge the batteries. In the current economy, fuel savings, staying "GREEN" and anti-idling regulations all have their impact. keeping your batteries in top condition is important.

If you're running an APU, or Fuel Fired Heater, these products will help to maintain battery temperature with your engine off, extending the time maximum power is available, and assuring that the batteries will be re-charge ready when the charging system comes back on line.

Other products to consider when buying a battery warmer:

BPT-2800 Mechanical, Automatic, Air Temperature Sensing, Coolant By-Pass Thermostat. This device senses the air temperature inside the battery box, and automatically controls the flow of coolant through the Battery Warmer to avoid overheating the batteries. Especially important if traveling between cold and warm locations (North / South in winter) or to eliminate the need for operator / technician intervention between seasons.

Insulation: For the coolant hoses to conserve coolant heat while the vehicle is in motion, - Consider the fact that 10 feet (3m) of 3/4" (19mm) I.D. coolant hose has approximately 3 square feet (0.28 square M) of surface area radiating heat away from the hose, and you'll realize quickly the importance of insulating your coolant hoses attached to accessory products.

Adapter Fittings: Arctic Fox provides an extensive variety of fittings to simplify your installation make it professional, and something to be proud to show your colleagues

For more technical information please go to the "Product Information" section below to see product data sheets, installation instructions, and additional product information.

 

Where To Buy Battery Heaters Online

All of our products are available in the aftermarket programs for most heavy duty truck dealers. For information on where you can purchase Arctic Fox fuel heaters from a distributor, contact us online, or call our customer service department at 1-800-654-5382 or 763-972-2758.